Wireless N DSL Modem Router


Reseller #: GT784WN-01
Model #: GT784WN
Hi-Res Images:
     

Overview / Features

Quick Overview

The full featured GT784WN Wireless N DSL modem router reduces the technology clutter. By integrating a DSL modem, wireless N networking, and full routing capability in one box, the GT784WN lets you solve all of your customer's connection and networking needs. The modem has been tested for maximum performance on all major DSL providers and supports ADSL2+ with speeds up to 24 Mbps downstream to support IPTV services.

Perfect for...

Carriers looking to deliver maximum performance, including IPTV, over ADSL2+/ADSL networks

Outstanding Benefits

  • Wireless N with MIMO smart antenna technology for blazing fast wireless speeds
  • ADSL2+ provides 24 Mbps downstream throughput capacity
  • Built-in AutoDetect Wizard simplifies installation - subscribers just have to know their username and password
  • Enterprise-level security, including a fully customizable firewall with Stateful Packet Inspection, denial of service protection, content filtering and more
  • TR-069 Remote Management support for easier management and troubleshooting
  • Tested for maximum performance on all major DSL providers

Coolest Feature

Combining a full-featured Wireless N router and DSL modem in one box reduces the clutter

 

 

Minimum System Requirements

  • DSL Internet service
  • Windows XP, Vista and 7
  • Windows PC with available Ethernet port
  • 802.11n, 802.11g or 802.11b wireless adapter for wireless connections
  • TCP/IP network protocol installed
  • Internet Explorer 7.0+ (recommended)
  • Other browsers such as Safari or Firefox, need to have Java Script enabled

 

 

Other Documents

Quick Start Guide Spanish Version This Quick Start Guide will walk through the easy steps to setup and configure the Wireless DSL modem.

Macintosh and other Non-Windows users, please use the GT784WN's Quick Start Guide to setup and configure the wireless DSL modem.
 
GT784WN - Firmware Upgrade Instructions These instructions explain how to download the Upgrade file and save it to the computer, and then how to use the "Upgrade Firmware" utility in the GT784WN's Web interface to apply the firmware upgrade.
 
 

Software/Firmware Downloads

2014-10-24 Firmware Upgrade - GT784WN NCS01-1.0.12
Instructions
NOTES:

This upgrade will restore your device to factory defaults, erasing all user names, passwords, wireless settings and advanced custom configurations that you have made. Be sure to make note of any custom settings before upgrading your unit.

Mac users using Safari may need to disable the 'Open 'safe' files after downloading' option before downloading this file.

Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

This Firmware Upgrade (NCS01-1.0.12) is for the GT784WN ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later. 
 
2011-09-30 Firmware Upgrade - GT784WN NCS01-1.0.8
Instructions
NOTES:

This upgrade will restore your device to factory defaults, erasing all user names, passwords, wireless settings and advanced custom configurations that you have made. Be sure to make note of any custom settings before upgrading your unit.

Mac users using Safari may need to disable the 'Open 'safe' files after downloading' option before downloading this file.

Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

This Firmware Upgrade (NCS01-1.0.8) is for the GT784WN ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

 
2011-08-10 Firmware Upgrade - GT784WN NCS01-1.0.2
Instructions
NOTES:

This upgrade will restore your device to factory defaults, erasing all user names, passwords, wireless settings and advanced custom configurations that you have made. Be sure to make note of any custom settings before upgrading your unit.

Mac users using Safari may need to disable the 'Open 'safe' files after downloading' option before downloading this file.

Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

This Firmware Upgrade (NCS01-1.0.2) is for the GT784WN ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.