Home:Support :11 Mbps (802.11b) PCI Wireless Adapter
11 Mbps (802.11b) PCI Wireless Adapter
802P125

Minimum System Requirements
  • Microsoft Windows 98, 98SE, Me, 2000, XP
  • Available PCI slot
  • 200MHz or faster processor 
  • 16MB of RAM or higher
  • TCP/IP network protocol installed
  • Note

    The wireless antenna for the 11 Mbps (802.11b) PCI Wireless Adapter (802P125) is fixed, it can not be changed or upgraded, it is permanently attached.


     
    Driver/Firmware Updates
     
    2004-03-29   WinXP - Driver & Utility - 802P125
    Both the Configuration Utility and theWinXP Driver for the PCI Wireless Adapter are combined in this one download.

    (Our RAW Drivers do not use a 'Setup' program to install, instead they are installed via the Windows Hardware Wizard. Once the drivers are extracted, each Operating System has it's own folder with an INF file, that the Wizard uses to install the driver.)

    Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

    Instructions
     
    2004-03-29   Win2K - Driver & Utility - 802P125
    Both the Configuration Utility and theWin2K Driver for the PCI Wireless Adapter are combined in this one download.

    (Our RAW Drivers do not use a 'Setup' program to install, instead they are installed via the Windows Hardware Wizard. Once the drivers are extracted, each Operating System has it's own folder with an INF file, that the Wizard uses to install the driver.)

    Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

     
     
    2004-03-29   Win9x - Driver & Utility - 802P125
    Both the Configuration Utility and theWin9x Driver for the PCI Wireless Adapter are combined in this one download.

    (Our RAW Drivers do not use a 'Setup' program to install, instead they are installed via the Windows Hardware Wizard. Once the drivers are extracted, each Operating System has it's own folder with an INF file, that the Wizard uses to install the driver.)

    Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

     
     
    2002-03-01   ISO for the 802P125, CD# 0410-0035-003
    This is the ISO file (CD image) for the 11 Mbps PCI Wireless Adapter (802P125) CD v1.25.

    Disc Contents
  • PDF User Manuals
  • Wireless Drivers and Configuration Utilitys
  • Instructions
     

     
    Manuals/Documentation
     
    User Manual - 802P125 PCI Wireless Adapter   This is the User Manual for the 11Mbps PCI Wireless Adapter (802P125).
     
    802P125 PCI Wireless Installation Instructions   Instructions for downloading and installing the 802.11b internal 11Mbps PCI Wireless adapter.
     
    Data Sheet - 802P125 PCI Wireless Adapter   This is the Data Sheet for the 11Mbps PCI Wireless Adapter (802P125).

    (Data Sheets will have a description of the technologies that the device supports, a list of Features, Technical Specifications, Minimum System Requirements, Package Contents and Technical Support Contact information.)
     

    Frequently Asked Questions

    Does Actiontec sell a Wireless Range Expander or Wireless Repeater, to extend a wireless networks coverage?

    Can the Wireless on this device be updated or upgraded?

    How is a replacement Actiontec CD obtained?

    Does the Actiontec 11Mbps Wireless PCI card support the newer wireless security system, WPA?




    Does Actiontec sell a Wireless Range Expander or Wireless Repeater, to extend a wireless networks coverage?
    No, Actiontec does not sell a Wireless Repeater. The Wireless Routers, Access Points and Gateways that we currently produce, do not support WDS or Wireless Distribution System. (WDS is a technology that allows the linking of several Wireless Access Points, to create one large Wireless network.)

    Can the Wireless on this device be updated or upgraded?
    No, the antenna on this device is permanently attached, and cannot be changed or upgraded.

    How is a replacement Actiontec CD obtained?
    There are two methods for obtaining a replacement Actiontec CD.
    1. Downloading the ISO for free from the Actiontec Support Site. If an ISO is available, it will be posted along with all other Drivers and Software, on the support page for that product. Instructions for converting the ISO file into a CD can be downloaded along with the ISO.
    2. Contacting Actiontec Technical Support by phone and purchasing one. Actiontec CDs can be purchased for $6.95 (including S&H) within the USA, and $8.95 (including S&H) for customers in Europe and the UK.
    To purchase call: 1-800-371-0442 (USA), 0800-180-4434 (UK)
    Please have your Visa or MasterCard ready, along with product name and model number, or CD part number if available. (MasterCard and Visa are the only cards Actiontec is able to accept.)

    Does the Actiontec 11Mbps Wireless PCI card support the newer wireless security system, WPA?
    No, the Actiontec 802.11b 11Mbps Wireless PCI card does not support WPA. This card supports 64 bit and 128 bit WEP (Wired Equivalent Privacy).

    Currently there are no firmware updates for this product.

    Back to Top




    Copyright ©1999-2009 Actiontec Electronics, Inc.