Home:Support :DataLink 56K Cell (RK)
DataLink 56K Cell (RK)
FM560RK

Minimum System Requirements
  • MS-DOS, Windows 3.1, 95, 98, NT4.0
  • With an available PC Card slot 
  • TCP/IP network protocol installed

    • Note

    The FM560RK is compatible with FAX mode Class1; and it has Cellular compatibility for Windows but not for DOS or Mac OS.


     
    Driver/Firmware Updates
     
    1998-08-19   Firmware Update - FM560RK v90-K56Flex
    NOTE: Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

    (To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

    The firmware update program runs on Windows 3.1 and 95, but will not operate in other OS environments. This update is only for the FM560RK/MD56020 modem. Do not use this upgrade on the FM560RK/MD56022 non-cellular modem. The downloads includes a 'Readme.txt' with firmware loading instructions and diagnostics.

    Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

    		 
     
    1998-09-15   Driver - DataLink (FM560RK) v2.52
    Instructions for installing and configuring the FM560RK DataLink PC Card Modem can found in the 'README.TXT' file included in the download. There is detailed AT Command information in the file 'ROCKWELL.TXT' (also in the download) for communicating with the FM560RK modems.

    Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

    		 
     

     
    Manuals/Documentation
     
    Technical Document FM560RK   This document contains Technical Data for the DataLink 56K PCMCIA modem, FM560RK.
     

    Frequently Asked Questions

    How can I determine if my PC card modem has cellular capabilities?

    Where can I get a replacement or spare modem cables?




    How can I determine if my PC card modem has cellular capabilities?
    We have non-cellular and cellular compatible PC card modems. You can identify the modems that are cellular compatible by looking at the ports. The cellular modem has two ports, a 4-pin land-line (telephone) port and a 15-pin cellular connector (port). The non-cellular modems have only the 4-pin land-line (telephone) port. The modems that have cellular compatibility are the (28.8K) FM288B, (33.6K) FM336C, (56K) FM560RK and FM560LKI. The DataLink FM560RK 56K modem and the DataLink v.90 International modem are both cellular compatible, but quite different. When fully updated, both are compatible with the v.90 standard. But the FM560LKI is International, and therefore has additional software that allows it to function in many countries other than the United States.

    Where can I get a replacement or spare modem cables?
    For a replacement modem cable, contact our online store at http://www.actiontecstore.com or at 1-800-371-0442. If calling, please provide the model of your card. For cellular connection cables, contact The SupplyNet at 1-800-826-0279 or at http://www.thesupplynet.com and provide them with the model number of your card.

    Back to Top




    | Terms & Conditions
    | Privacy Statement
    | Company
    | How to Buy
    | Support
    | Resellers
    | Partners
    | Products
    | Warranty
    Copyright ©1999-2009 Actiontec Electronics, Inc.