Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
V1000H
Wireless N VDSL Modem Router
Deliver HD IPTV and other high bandwidth services with Actiontec's powerful V1000H Wireless N VDSL Modem Router.. With a robust hardware design and loads of in-home networking options (including HPNA, Gigabit Ethernet, and Wireless N), this VDSL modem router can simultaneously support a wide range of demanding multimedia applications, including HDTV, standard TV, Voice over WiFi, media sharing, and online gaming. The V1000H VDSL Modem Router offers a potential ten-fold improvement in impulse noise resilience and up to 15% service reach improvement, so carriers can significantly improve their IPTV and high speed data services, extend their network service area and deliver triple play services to more subscribers.
High Res Photos:  

802.11n Wireless Built In

The Router supports 802.11n out of the box, with backward compatibility to older wireless protocols, combining flexibility with power. Also included is MIMO (Multiple Input Multiple Output) technology, which further improves your wireless experience by offering better whole home coverage and fewer dead spots.

Gigabit Ethernet Built In

To further add to the Router’s Power, Gigabit Ethernet is available on the WAN and LAN sides. Supporting speeds up to 1000 Mbps, you can connect to any high speed Internet connection via Ethernet and watch online videos or podcasts, download large files or move massive amounts of data with no problems, no hiccups, and no sweat.

Auto Fall Back to ADSL2+/2

The V1000H VDSL router features “Auto Fall Back to single-line ADSL2+/2” to seamlessly operate on ADSL2+ and ADSL2 networks. This means the same router automatically works on any VDSL or ADSL network.

Technical Specifications

Interfaces: - One VDSL/ADSL WAN
- One 10/100/1000 BaseT Ethernet WAN
- Four 10/100/1000 BaseT Ethernet LAN
- One HPNA 3.1 LAN or WAN
- One USB Host Port
Wireless:
- 802.11 b/g/n
- WPS
Wireless Security:
- Wi-Fi Protected Access (WPA,WPA2)
- WEP, TKIP encryption
- 802.1x authentication
- Pre-Shared Key (PSK)
- MAC Address Filtering
More Details: Email broadband-sales@actiontec.com.

Minimum System Requirements

  • VDSL or ADSL2/2+ Internet service (ADSL 2/2+ capable via Auto Fallback)
  • Windows XP, Vista and 7
  • Windows PC with available Ethernet port or
  • HPNA 3.1 LAN or WAN
  • 802.11n, 802.11g or 802.11b wireless adapter for wireless connections
  • TCP/IP network protocol installed
  • Internet Explorer 7.0+, Safari or Firefox (JavaScript should be enabled)

 

Related Videos

How to setup basic port forwarding on the V1000H Wireless N VDSL Modem Router

Published on: Mar 12, 2010
Viewed: 35520 times

Customer Reviews

Support

Register Your Product

Register your product and receive product updates, related news and more from Actiontec.

 

Downloads
Software/Firmware Downloads
2013-04-09 Firmware Upgrade - V1000H NCS 31.30L.34
Instructions NOTE: Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

This Firmware Upgrade (31.30L.34) is for the V1000H ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

2011-05-04 Firmware Upgrade - V1000H NCS 31.30L.33
Instructions NOTE: Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.

(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)

This Firmware Upgrade (31.30L.33) is for the V1000H ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.

Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.

 

Contact Support

Online

Email support via the "Technical Support Request Form" is available to ALL products, and is always FREE.

Fax

Fax based support can be utilized by any product, and it too is FREE.
There is one Telephone number for Technical Support via FAX: (719) 522-9421

Phone

Telephone based Technical Supports availability is determined by the product and the place of purchase.
  • If you purchased the Actiontec product in a retail store, the accompanying documentation will identify the types of support available for that product.
  • If you purchased the Actiontec product from your ISP, your first point of contact will always be the ISP.
If you are calling from within the United States, dial: 1 (888) 436-0657

Product Sheet

User Manual

Related Products

Have a question or need more info?

For general information about Actiontec Products or sales
inquiries, please use this form.

Do not use this form for technical support requests.
Report support issues using Technical Support Form

Name

Email

Questions/Comments


Warning: mysqli::close() [mysqli.close]: Couldn't fetch mysqli in /var/www/vhosts/actiontec.com/httpdocs/products/product.php on line 894