* The GT704WG is compatible with Vista, but the software on the CD is not. Vista compatible drivers can be downloaded directly from the "Drivers" section of this support page.
|GT704-WG USB Driver Installation Instructions||Instructions for downloading and installing the USB driver for the GT704-WG.|
|User Manual - GT704-WG Vz 220.127.116.11.18.104.22.168.8||This is the User Manual for the Verizon version 22.214.171.124.126.96.36.199.8 firmware (red background) used on our Retail GT704-WG for Verizon, a 54 Mbps Wireless DSL Gateway with a 4 port switch. This Manual also works for firmware version 188.8.131.52.184.108.40.206.9 since it uses the same interface.|
|GT704WG - Firmware Upgrade Instructions||These instructions explain how to download the Upgrade file and save it to the computer, and then how to use the "Upgrade Firmware" utility in the GT704WG's Web interface to apply the firmware upgrade.|
|User Manual - GT704-WG QW04 220.127.116.11.6.3||This is the User Manual for version 18.104.22.168.6.3 or QW04 (Qwest) firmware used on our Retail GT704-WG for Qwest, a 54 Mbps Wireless DSL Gateway with a 4 port switch.|
|User Manual - GT704-WG Vz 22.214.171.124.126.96.36.199.5||This is the User Manual for the Verizon version 188.8.131.52.184.108.40.206.5 firmware (pale blue background) used on our Retail GT704-WG for Verizon, a 54 Mbps Wireless DSL Gateway with a 4 port switch. This Manual also works for firmware versions 220.127.116.11.18.104.22.168.3 & 22.214.171.124.126.96.36.199.7.1 since they use the same interface.|
|2005-07-22||Firmware Upgrade - GT704-WG NCS 188.8.131.52.6.0
NOTE: Actiontec Electronics will not provide a refund or replacement, for products that have failed due to the loading of incorrect firmware or the testing of custom firmware.
(To identify your Actiontec product, look for the model number. It is located on the FCC sticker, found on the bottom or back of the product. Typically the model number is in the sticker's upper right hand corner.)
This Firmware Upgrade (184.108.40.206.6.0) is for the GT704-WG ONLY. It is not to be used on any other model of router or gateway. This is a NCS (Non-Customer Specific) Firmware, and is not intended as an Upgrade for ANY ISP Specific Firmware, regardless of version number. Therefore, you should not load a NCS Firmware Upgrade on to a gateway that currently has an ISP Specific Firmware installed. The reverse is also true. You should not load an ISP Specific Firmware Upgrade on to a gateway that currently has a NCS version installed. These types of Upgrades frequently result in a nonfunctional device.
Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.
|2005-07-22||USB Driver - GT704-WG
There are USB drivers for Windows 98SE, ME, 2000 and XP included in this download.
NOTE: Customers that have the new Windows Vista operating system installed, can utilize the USB driver for XP, provided they are running one of the 32-bit versions of Vista. There are no USB drivers available for 64-bit versions of Windows.
(Our RAW Drivers do not use a 'Setup' program to install, instead they are installed via the Windows Hardware Wizard. Once the drivers are extracted, each Operating System has it's own folder with an INF file, that the Wizard uses to install the driver.) Clicking the link above will initiate the download, and at the prompt 'Do you want to run or save this file?' select 'Save'. At the following 'Save As' dialog, be sure to select a familiar location to save the file, like 'My Documents' or the 'Desktop', so that the file will be easy to find later.
|2005-06-02||ISO for GT704WG NCS CD# 0410-0105-001
This is the ISO file (CD image) for the v2.0 Retail (NCS) GT704-WG CD.